USBポートの総数 | 1 |
---|---|
対応機種 | 携帯電話 |
電池付属 | いいえ |
電池使用 | いいえ |
ブランド名 | TamperSTOP |
製品型番 | M1300 |
付属品 | 充电芯片 |
その他 機能 | 无线充电 |
接続方式 | ワイヤレス |
組立方式 | 直插 |
製品サイズ | 10.67 x 6.1 x 0.51 cm; 9.92 g |
商品重量 | 0.35 オンス |
Qi(チー)規格Type-C 1300mA高速ワイヤレス充電トランスミッタレシーバWireless Charging Receivers専用Google Pixel, Samsung Galaxy, Huawei, LG, HTC, ZTE, Nexus, One Plus等
ブランド | TamperSTOP |
接続技術 | ワイヤレス |
コネクタタイプ | USB |
対応デバイス | 携帯電話 |
対応電話モデル | SAMSUNG Galaxy Note 9, SAMSUNG Galaxy S10 |
付属コンポーネント | 充电芯片 |
特徴 | 无线充电 |
入力電圧 | 12 ボルト |
取り付けタイプ | 直插 |
アンペア数 | 1300 ミリアンペア |
アマゾンに買い物に訪れる何億人ものお客様にご自身のブランドの商品をお届けいただけます。 FBAなら配送からカスタマーサービスまでアマゾンにおまかせ。 今なら新規出品者様向け特典で最大787.5万円還元 Amazonで販売を開始する
おすすめの類似商品
この商品をチェックした人はこんな商品もチェックしています
商品の情報
詳細情報
登録情報
商品モデル番号 | M1300 |
---|---|
ASIN | B088NRBHBP |
Amazon.co.jp での取り扱い開始日 | 2020/5/24 |
おすすめ度 |
5つ星のうち3.4 |
Amazon 売れ筋ランキング | - 249,725位家電&カメラ (家電&カメラの売れ筋ランキングを見る) - 771位携帯電話・スマートフォン用ワイヤレス充電器 |
保証とサポート
ご意見ご要望
商品の説明
今日ワイヤレス充電であなたの電話をアップグレードしてください!
MyMAXは常に、最速でスリムなQiワイヤレス充電レシーバーを提供し、コードレス充電の優れた便利さを享受し、電話を落として充電するだけで今すぐ利用できるように努めてきました。
Qi(チー)規格Type-C 高速ワイヤレス充電トランスミッタレシーバ適用Compatible with: Google Pixel XL, 2, 2 XL, 3, 3a, 3a XL; Samsung Galaxy S10, S9+, S9, S8+, S8, Note 9, 8, C9 Pro, A20, A11, A10, A9S, A9, A8, A71 5G, A71, A70, A60, A51, A40, A30, A6, A3, Samsung W2019; LG G6, G5, G4, Stylo 5, Stylo 4, V20; OnePlus 8, 7T Pro, 7T, 7, 6T, 6, 5T, 5, 3T, 3; Motorola Droid X, Moto G7, 7, G6, G6 Plus, Z4, Z, Z Play, X4; HTC U11, U11 plus, 10; Nokia X6, 7 Plus, 8; Sony Xperia XA2, XZ, XZ Premium, Compact; Huawei P40, P30, P20, P10, P10 Plus, P10 Lite, P9, P9 Plus, P9 Lite, P8, P8 Plus; Huawei Mate20 X(5G), Mate20 Pro, Mate10, Mate Pro; Huawei Honor X10, 10, 10Lite, 9, 8, 7; Meizu MX6, Pro 5, 6, 7; ZTE Blade Z max, Axon 8; Sharp Aquos SH, 13C, Aquos Zeta SH, 06E, Sharp SH, 05D ; Asus Zenfone 3, 3 Deluxe, 4, 5; Nexus 5Х, 6Р; Cat S48C; Alcatel 6, 3V等。
注意:
1.使用しないでください:✔厚さが5mmを超えるケース。 ✔金属製のリングまたはプレート付きのケース。 ✔金属ケース; ✔1日で重くまたは頻繁にプラグを抜き差しします。
2. 请購入前に、レシーバーのタイプを確認してください。 このqiレシーバーが機能しない場合は、別の新しいワイヤレス充電器または電話モデルで試して、充電器または電話モデルの問題かどうかを確認してください。 さらに、plsは充電中、qiレシーバーをワイヤレス充電器の中央に配置したままにします。ワイヤレス充電器が点滅する場合は、電話ケースを取り外します。
高速ワイヤレス充電
大電流出力5V / 1300mAで、わずか3時間以内で94%充電できます。
優れた充電効率
スマートインテリジェントチップセットを備えたより大きな銅コイルは、73%を超える優れた充電効率を得るのに役立ちます。
低熱放出
インテリジェント制御充電ICとTIのWPCフェライトを採用することで、充電時に携帯電話が過熱するのを防ぐことができます。
吸収材
高い吸収率と耐熱性、耐湿性、耐食性、UV保護を備えています。
それを使用する方法?
|
|
|
|
---|---|---|---|
ステップ1充電ヘッドを電話ポートに接続します。 |
ステップ2両面テープの剥離紙をはがし、電話機の背面に貼り付けます。 |
ステップ3必要に応じて、電話をプラスチックケースに入れ、電話ケースの厚さが4mm未満であることを確認します |
ステップ4電話をワイヤレス充電器の中央に向けて、ワイヤレス充電の楽しさを楽しみ始めましょう |
類似商品と比較する
この商品 Qi(チー)規格Type-C 1300mA高速ワイヤレス充電トランスミッタレシーバWireless Charging Receivers専用Google Pixel, Samsung Galaxy, Huawei, LG, HTC, ZTE, Nexus, One Plus等 | おすすめ | dummy | dummy | dummy | |
もう一度お試しください 追加されました | もう一度お試しください 追加されました | もう一度お試しください 追加されました | もう一度お試しください 追加されました | ||
価格 | 現在お取り扱いできません。 | ¥1,428¥1,428 | -10% ¥957¥957 過去: ¥1,059 | ¥1,499¥1,499 | ¥1,490¥1,490 |
配達 | — | 最短で5月25日 土曜日のお届け予定です | 最短で5月25日 土曜日のお届け予定です | 最短で5月25日 土曜日のお届け予定です | 最短で5月25日 土曜日のお届け予定です |
お客様の評価 | |||||
充電速度 | 3.6 | 2.2 | 4.3 | 3.0 | 3.4 |
安定性 | 3.2 | 2.6 | 4.2 | 3.3 | 3.6 |
耐久性 | 3.0 | — | — | 3.0 | 3.6 |
販売元: | — | Poover-jp | Richer-RJ | OHITEC Japan | AnkerDirect |
コネクタタイプ | USB | USB | — | Lightning, USB | Micro USB, USB |
対応端末 | 携帯電話 | — | 携帯電話 | 携帯電話 | スマートフォン |
入力電圧 | 12 volts | 5 volts | 5 volts | 5 volts | 5 volts |
仕様準拠 | Qi | — | Qi | Qi | Qi |
出力電圧 | 5 volts | 5 volts | 5 volts | — | 5 volts |
電流定格 | 2 amps | 2 amps | 1 amps | 1 amps | 2 amps |
重量 | 0.35 ounces | — | 0.01 kilograms | — | 0.15 pounds |
特定の情報をお探しですか?
イメージ付きのレビュー
-
トップレビュー
上位レビュー、対象国: 日本
レビューのフィルタリング中に問題が発生しました。後でもう一度試してください。
でも、出力1,000mAのレシーバーでは思うように充電できなかったので、1,300mA出力のこちらのレシーバーに変えてみたところ、正しく充電できました。
高速充電はできないけれど、一晩あれば満充電になるし、何よりもガラケーのクレードルよりも充電が楽になって、母も喜んでくれたので幸いです。
本製品のレシーバ部分がかなり狭い範囲で充電器の発信部と合致しないと反応しません。
Anker Soundcore Wakeyで使用しましたが、かなりの確率で充電を開始しませんでした。(充電器は反応していますが、スマホが充電を開始しない。充電器側はエラー表示をしている)
充電機側は Xperia-1IIIなどでも問題なく充電開始できている物です。
発信機と受信機のズレはある程度許容して動作してくれないと、本製品の性質上スマホを逆さまにして(マトが見えない状態で)使用するため、非常に充電が開始しづらい状態でした。
かっちりガイドのある充電器ならまだしも平置き型の充電器なども考慮した場合、もう少し余裕のあるレシーバーであってほしかった。
残念ながらお蔵入りです。
まぁ、こんなもんでしょう。
なったのでこちらに交換しました。
問題なく使用出来てよかったです。
充電が不安定になります バッテリーのせいか
レシーバーのせいか かなり熱いです
充電は N○のレシーバーより早く感じました
かなり熱いので耐久に不安。
次はワイヤレス充電対応のスマホにしたいと思ってます。
他の国からのトップレビュー
This QI wireless charger terminal is naked circuitry and needs to be handled with extra care. If you fat-finger or have a little tremor in your hands be extra cautious because these devices are delicate while handling. Once installed you're good to go. I get my phone charged in a timely manner.
Avoid bending the cable or pulling it. Do not bend or pull the USB terminal. Do not bend the flat inductor as you may damage it. Use with care while installing. I've seen people's complains that "it doesn't work".... oh well. Chances are they broke it without noticing. If you are careful like when you are installing your new $1,000 video card, you should be fine.
Remove your phone protection/cover and without bending the cable insert the USB in place. Then on a one time only, carefully bend the cable to set the QI terminal in place flat to the surface of the phone back. Put the cover back in as shown on the second picture making sure the cable and terminal don't get tangled in the process. Is all about taking care of the conductors and terminal.
Align the phone in a way that the terminal in the back is right up in the middle of the QI charger making sure the QI terminal and the charger align. The device throws a little bit over 5.5W (revised number, I went wrong in my math) when I test it. You can see third picture on my old Canadian BlackBerry. Yeah, in Canada we make really cool stuff.
This charger is very useful to avoid pulling on/off a cable on the phone USB plug which WILL wear out shortening the life of your phone. This QI terminal will greatly extend the life of your phone since many phones give up when the USB becomes useless due to wear and tear and you can't charge it anymore. The cons to it is, you need to forget you have a USB connector there. Once the charger terminal is in place, do not take it off.
This terminal is basically a flat inductor that transform a projected electric field from the charger into this terminal building ~5.5W on 5V (math revised). Charging will depend on the size vA of your battery and the circuitry feeding it. On my BlackBerry takes 3 hours to a full charge from zero. On my new Galaxy Note 20 takes a bit longer (the Note 20 comes with its own wireless charging, I just plugged the terminal flat and set the phone apart from the charger for experimental purposes).
Hopes this clarifies how to use this. This is not a scam like some people says, is not a bad product,. Is way too easy to pin the blame on someone else instead of doing it right in the first place.
2021年9月28日にカナダでレビュー済み
This QI wireless charger terminal is naked circuitry and needs to be handled with extra care. If you fat-finger or have a little tremor in your hands be extra cautious because these devices are delicate while handling. Once installed you're good to go. I get my phone charged in a timely manner.
Avoid bending the cable or pulling it. Do not bend or pull the USB terminal. Do not bend the flat inductor as you may damage it. Use with care while installing. I've seen people's complains that "it doesn't work".... oh well. Chances are they broke it without noticing. If you are careful like when you are installing your new $1,000 video card, you should be fine.
Remove your phone protection/cover and without bending the cable insert the USB in place. Then on a one time only, carefully bend the cable to set the QI terminal in place flat to the surface of the phone back. Put the cover back in as shown on the second picture making sure the cable and terminal don't get tangled in the process. Is all about taking care of the conductors and terminal.
Align the phone in a way that the terminal in the back is right up in the middle of the QI charger making sure the QI terminal and the charger align. The device throws a little bit over 5.5W (revised number, I went wrong in my math) when I test it. You can see third picture on my old Canadian BlackBerry. Yeah, in Canada we make really cool stuff.
This charger is very useful to avoid pulling on/off a cable on the phone USB plug which WILL wear out shortening the life of your phone. This QI terminal will greatly extend the life of your phone since many phones give up when the USB becomes useless due to wear and tear and you can't charge it anymore. The cons to it is, you need to forget you have a USB connector there. Once the charger terminal is in place, do not take it off.
This terminal is basically a flat inductor that transform a projected electric field from the charger into this terminal building ~5.5W on 5V (math revised). Charging will depend on the size vA of your battery and the circuitry feeding it. On my BlackBerry takes 3 hours to a full charge from zero. On my new Galaxy Note 20 takes a bit longer (the Note 20 comes with its own wireless charging, I just plugged the terminal flat and set the phone apart from the charger for experimental purposes).
Hopes this clarifies how to use this. This is not a scam like some people says, is not a bad product,. Is way too easy to pin the blame on someone else instead of doing it right in the first place.